Xpadder: Use Your PC Gamepad Instead of Keyboard

xpadder-header.jpg

Xpadder is a small and simple Windows application that lets you make the most of your gamepad – and it is free!Xpadder has several features. The most basic is that it lets you map keys to your gamepad buttons. I decided to make a tutorial here to connect with the emulator guides. Some obvious uses of Xpadder in this context:

  • Some emulators that don’t support gamepads natively
  • Some emulators that don’t let you redefine the gamepad commands freely (use keys, and remap them any way you want)
  • Use it to map function keys from emulators to extra buttons (e.g. you can map load and save state to shoulder buttons in Genesis games for “quick load” and “quick save”)

Xpadder also lets you map mouse commands to your pad, or map sequences of keys to a single button press. I leave it to you to devise your own uses for these. Personally I’ve been happy to use solely the basic feature; I have used it a lot with freeware windows games that typically don’t support pads natively, and with WinUAE, the Amiga emulator – many Amiga games use keys as the standard joysticks only had one button, and it’s very inconvenient to access these keys when using gamepads (Amiga joysticks were often 1-handed, while pads are 2-handed).

The tutorial

Step 1: Download Xpadder

Go to the official site in the download section, or click here [if we host it] to get it instantly.

Step 2: Extract Xpadder

It’s very simple. Just unzip it where you want to keep the program. It is a single, small file, no installation required. I advise you to make a folder for it though, so you can easily keep your saved profiles.

Step 3: Setup your gamepad(s) – the layout

Run Xpadder by double clicking on it.

Xpadder

You need to configure your gamepad first. Click “New” to do so; you are taken to the Controller editor:

Controller Editor

If you want, you can add a picture in the profile – in the “Image” tab, click open and choose what you want:

Controller Image

There are some such images already prepared in Xpadder’s official site, in the Images section (you might want to check if your gamepad is already there – apparently Xpadder treats that pink color as transparent).

Go into the next tabs to configure the thumbsticks. Unfortunately I cannot test this as my gamepad is digital only. It should be almost as easy as doing the d-pad buttons, in the “Direction pad” tab:

Digital pad

Just check the “Enabled” box (as in the image) and the program will detect and prompt you to press the directions in turn.

You may want to move the directional pad to another location (particularly if you have used an image) – just drag and drop:

Drag and drop to where you want buttons to be

Adding buttons is also very simple. Pressing the buttons on your gamepad makes them appear in the layout:

Adding buttons

This should make it clear why it is helpful to reproduce the layout of your pad – although you can remind yourself what corresponds to each pad button by pressing it on the pad (this is why the last button on the right is different in the image above). Like with the d-pad, you can drag and drop each “button” in the layout at your will:

Buttons laid out

If your pad has analog trigger buttons, the last tab is for that. My pad only has digital triggers, so I needed to add them already (the two top squares).

You can repeat the process for other pads, if you have them, and save to separate controller profiles, switching between them as desired.

Step 4: Setup your profile(s)

With a layout open (See Step 3), assign keys to your pad’s buttons by clicking the corresponding “button” in the profile (e.g. the “up” of the d-pad); an on-screen keyboard pops up:

On screen keyboard

Then, just press the desired key (e.g. the “up” cursor key) on the on-screen keyboard:

Up key assigned to up on the pad

You can remove assignments by clicking the large “NONE” key of the on-screen keyboard:

Removing assignments

The right-most part of the on-screen “keyboard” serves to assign mouse movements to your gamepad – in exactly the same way.

Step 5: Save the assignments for ease of use

Done with all the assignments for a particular profile? Save the profile so you don’t have to do it next time:

Saving profiles

To access them again you can go to “Open” in the menu shown above. You can also quickly and easily swap between profiles you have prepared by clicking the profile line:

Changing profiles quickly

That is pretty much all I wanted to cover with this tutorial. Go download and try this wonderful application (if you really like it, you can drop an e-mail thanking the creator at the official website).

As usual, share your opinions or ask questions in the comments section, or in the forums.

Ivo.


92 Comments

JP says:

Good guide, thanx

prince says:

do i need an emulator b4 i can use xpadder

Akash says:

Xpadder is awesome. I have been using it for an year now and it has never failed me. I use it for regular windows functions and playing guild wars. It makes things much convenient than typing on my laptop keyboard. I even use it to enter passwords where ever needed.

Ivo I hope you also add the functionality, wherein I can add 2 different functions to 2 keys on my gamepad, and a 3rd function for when I press both the keys simultaneously. (and I am not talking abt. creating different sets and using the set selector)

Keith says:

I paid 2 time online for xpadder and it still won’t work with my
X box 360. I love to get it working but I not buying it again.

Shaun says:

I tried to use JoyToKey with a Speedlink Strike gamepad to play DOOM 3. Ihave configured the buttons (I think), but it still wont work?
Any Hints?

Have you learnt exactly where i can find a cheap ps3, im on
a budget and my daughter birthday is next month.

xpadder says:

Every weekend i used to visit this site, for the reason that i wish
for enjoyment, since this this site conations in fact
nice funny data too.

Hello my family member! I wish to say that this post is awesome, nice written and
include almost all vital infos. I’d like to look extra posts like this .

shaun says:

Hey dudes – is there a version of Xpadder for Windows 8.1? i cant get it to work because of incompatible software

Cheers

¡Hola! .Me gustaría dar un enorme aprobado por interesante información que tenemos aquí en este sitio . Voy a volver muy pronto a disfrutar con esta web.

Melanie M. Scott says:

I’m impressed, I must say. Seldom do I come across a blog that’s both educative and interesting, and without a doubt, you have hit the nail on the head. The problem is an issue that not enough folks are speaking intelligently about. Now i’m very happy I stumbled across this during my hunt for something regarding this.

Leave a Reply

Your email address will not be published. Required fields are marked *

Get a nice roundup of new retro gaming content once or twice a month.