Recommendations for HDMI Splitter for additional Inputs?
Recommendations for HDMI Splitter for additional Inputs?
Does anyone have solid recommendations for an HDMI Switch for some consoles? Maxed out my receiver inputs prefer to be inexpensive but not too cheap...
Now that I have my Super NT Mini, I'm maxed out my receiver inputs. I also have a PS3, 360, a Dreamcast (w/ VGA to HDMI adapter) and an Apple TV (the most used device in that room currently).
I mainly want something reliable and won't die after a year (like I read in a lot of Amazon reviews). Remote of some sort would be preferred.
Now that I have my Super NT Mini, I'm maxed out my receiver inputs. I also have a PS3, 360, a Dreamcast (w/ VGA to HDMI adapter) and an Apple TV (the most used device in that room currently).
I mainly want something reliable and won't die after a year (like I read in a lot of Amazon reviews). Remote of some sort would be preferred.
Support Racketboy on Patreon
Follow Racketboy on Social: Instagram / Twitter / Facebook
Subscribe to Email Newsletter (Blog / Guide Updates Every Week or Two)
Follow Racketboy on Social: Instagram / Twitter / Facebook
Subscribe to Email Newsletter (Blog / Guide Updates Every Week or Two)
Re: Recommendations for HDMI Splitter for additional Inputs?
I used the "VHD Prosumer UltraHD HDMI True Matrix 4x2" (VHD-PRO4x2i) for over a year.
It does have some quirks, but the main problem I have with it is it uses the same IR codes (slightly offset) as the XRGB-Mini Framemeister. Any input from either remote messes up the other.
Foil flaps made from electrical tape over the UR receiver got tedious.
I'll send it cheap - PM me.
I found a new, better matrix switch - 6 input & a new manufacturer with great reviews:
HDMI 6x2 Matrix 4Kx2K 3D ARC PIP
...
Same hardware chipset - same problems, but this one is actually much better overall. It really does do what it claims. It just shouldn't be combined with a framemeister.
I think I will have to go with Genfen, but I can't resist the allure of the cheaper alternative.
If you do not have a Framemester, or are willing to make foil flaps for the IR input, PM me to get a good 4x2 matrix switch - cost of shipping from BC, Canada.
It does have some quirks, but the main problem I have with it is it uses the same IR codes (slightly offset) as the XRGB-Mini Framemeister. Any input from either remote messes up the other.
Foil flaps made from electrical tape over the UR receiver got tedious.
I'll send it cheap - PM me.
I found a new, better matrix switch - 6 input & a new manufacturer with great reviews:
HDMI 6x2 Matrix 4Kx2K 3D ARC PIP
...
Same hardware chipset - same problems, but this one is actually much better overall. It really does do what it claims. It just shouldn't be combined with a framemeister.
I think I will have to go with Genfen, but I can't resist the allure of the cheaper alternative.
If you do not have a Framemester, or are willing to make foil flaps for the IR input, PM me to get a good 4x2 matrix switch - cost of shipping from BC, Canada.
- Jmustang1968
- Next-Gen
- Posts: 6530
- Joined: Fri Mar 11, 2011 6:51 pm
- Location: Houston, TX
Re: Recommendations for HDMI Splitter for additional Inputs?
I have this one and it works well:
https://www.amazon.com/gp/aw/d/B01BV1XB ... p_mb_pd_t1
4x1 with remote. Not suoer fancy, but gets the job done.
https://www.amazon.com/gp/aw/d/B01BV1XB ... p_mb_pd_t1
4x1 with remote. Not suoer fancy, but gets the job done.
My Sales Thread
My Gameroom and Collection pics
Game Room Video Tour
RPGamer Previewer
Current Feedback: +266 Racketboy, +172 NintendoAge
My Gameroom and Collection pics
Game Room Video Tour
RPGamer Previewer
Current Feedback: +266 Racketboy, +172 NintendoAge
Re: Recommendations for HDMI Splitter for additional Inputs?
I've been using these:
https://www.amazon.com/gp/product/B0015 ... UTF8&psc=1
They auto switch based on seeing a signal coming into the input (though there also is the option to use a remote to manually switch) and I haven't had any problems with them. It just means that my PC needs to be on a dedicated HDMI input, as it'll always be generating a signal.
https://www.amazon.com/gp/product/B0015 ... UTF8&psc=1
They auto switch based on seeing a signal coming into the input (though there also is the option to use a remote to manually switch) and I haven't had any problems with them. It just means that my PC needs to be on a dedicated HDMI input, as it'll always be generating a signal.
Re: Recommendations for HDMI Splitter for additional Inputs?
Jmustang1968 wrote:I have this one and it works well:
https://www.amazon.com/gp/aw/d/B01BV1XB ... p_mb_pd_t1
4x1 with remote. Not suoer fancy, but gets the job done.
OK so I bought this one and still having troubles. My Gamecube with GCHD adapter works fine on it, but my 360 and SuperNT doesn't show up on the screen.
The switch shows that that HDMI input is active but it never shows a picture. I tried manually switching, but no luck. Gamecube works every time though.
I also tried on of these, but it didn't work at all.
https://www.amazon.com/gp/product/B0746 ... UTF8&psc=1
I had lower expectations on that one as cheaper and didn't have active power supply.
I have a nice Onxyo receiver, but only has 4 HDMI inputs...
Support Racketboy on Patreon
Follow Racketboy on Social: Instagram / Twitter / Facebook
Subscribe to Email Newsletter (Blog / Guide Updates Every Week or Two)
Follow Racketboy on Social: Instagram / Twitter / Facebook
Subscribe to Email Newsletter (Blog / Guide Updates Every Week or Two)
- Jmustang1968
- Next-Gen
- Posts: 6530
- Joined: Fri Mar 11, 2011 6:51 pm
- Location: Houston, TX
Re: Recommendations for HDMI Splitter for additional Inputs?
Thats strange, I have a Super NT as well, and I use it on that switch as well as retron 5 and my switch. No issues. Sometimes it is a little slow to pop up, but hasnt not worked yet...
My Sales Thread
My Gameroom and Collection pics
Game Room Video Tour
RPGamer Previewer
Current Feedback: +266 Racketboy, +172 NintendoAge
My Gameroom and Collection pics
Game Room Video Tour
RPGamer Previewer
Current Feedback: +266 Racketboy, +172 NintendoAge
Re: Recommendations for HDMI Splitter for additional Inputs?
Hmm. Can you think of any little oddities or rituals to keep in mind or try? Something that maybe I’m just not doing right?
Support Racketboy on Patreon
Follow Racketboy on Social: Instagram / Twitter / Facebook
Subscribe to Email Newsletter (Blog / Guide Updates Every Week or Two)
Follow Racketboy on Social: Instagram / Twitter / Facebook
Subscribe to Email Newsletter (Blog / Guide Updates Every Week or Two)
- Jmustang1968
- Next-Gen
- Posts: 6530
- Joined: Fri Mar 11, 2011 6:51 pm
- Location: Houston, TX
Re: Recommendations for HDMI Splitter for additional Inputs?
Well I will flip through the inputs... but thats usually because I cant remember which each port they were plugged into... I do have mine going to an AV receiver and then to tv.
My Sales Thread
My Gameroom and Collection pics
Game Room Video Tour
RPGamer Previewer
Current Feedback: +266 Racketboy, +172 NintendoAge
My Gameroom and Collection pics
Game Room Video Tour
RPGamer Previewer
Current Feedback: +266 Racketboy, +172 NintendoAge
Re: Recommendations for HDMI Splitter for additional Inputs?
Jmustang1968 wrote:Well I will flip through the inputs... but thats usually because I cant remember which each port they were plugged into... I do have mine going to an AV receiver and then to tv.
Yeah that's my setup too. I suppose I could test it on my upstairs receiver, but that wouldn't ultimate help me.
The interesting thing is that when I turned on my Gamecube, it automatically switched to the proper input.
And it seemed to switch the indicator light to the right input for both the SuperNT and 360 -- just no picture to match. I did wait a bit...
And just to confirm, I tested both consoles connected direct to receiver and they were fine without the switch in between.
Support Racketboy on Patreon
Follow Racketboy on Social: Instagram / Twitter / Facebook
Subscribe to Email Newsletter (Blog / Guide Updates Every Week or Two)
Follow Racketboy on Social: Instagram / Twitter / Facebook
Subscribe to Email Newsletter (Blog / Guide Updates Every Week or Two)
- Jmustang1968
- Next-Gen
- Posts: 6530
- Joined: Fri Mar 11, 2011 6:51 pm
- Location: Houston, TX
Re: Recommendations for HDMI Splitter for additional Inputs?
I suppose you may have just received a faulty one... Should be able to get it replaced through amazon.
My Sales Thread
My Gameroom and Collection pics
Game Room Video Tour
RPGamer Previewer
Current Feedback: +266 Racketboy, +172 NintendoAge
My Gameroom and Collection pics
Game Room Video Tour
RPGamer Previewer
Current Feedback: +266 Racketboy, +172 NintendoAge