The Power Adapter is rated for 5v - 1.0A
It draws 475mA at 5v with volume around 50%.
It is designed to run on a 3.7v 1300mAh battery included.
I am guessing it will run around 3 hours with that battery.
A lot of room in there on the sides but not depthwise.
The screen is only 5/16" deep at the deepest point.
Also notice the double "led" lines going in. Seems to be an led screen. And a 3.3v screen as well. Interesting.
The first Led line has 17.9v going to it. The second is a ground.
A couple of thoughts :
Yes the video is "slightly" blurry. Not real noticeable but a bit less crisp then the 3.5" screens I use on my Nomad Lcd Hack.
So I have confirmed that the included screen is at fault and not the Yobo system. I attached a 3.5" screen I use on my Nomads and it is perfectly clear, the included screen is slightly blurry.
Now the problem is that the included screen runs on 3.3v, but the 3.5" I have is to dim at 3.3v. No problem because the system also runs off 5v. So just hook up to the 5v source. Nope because the battery is only 3.7v. arrghhh.
Compatibility seems nearly perfect. Sound and gameplay has been spot on. Here is my list so far :
Aladin
Caesars Palace
Cal Ripken Jr. Baseball
Clayfighter
Clue
Donkey Kong Country 1,2,3
Final Fight
Fzero
Hook
Illusion of Gaia
Mortal Kombat
Ncaa Basketball
Nhlpa Hockey 93
Star Fox
Secret of Evermore
Super Black Bass
Super Mario World
Super Mario All Stars
Super Metroid
Super Return of the Jedi
Super Star Wars
The Simpsons Bart's Nightmare
Top Gear
Zelda Link to the Past
The only one I found that wouldn't work is John Madden 94. Controls were glitching.
