Need help with your PC or Modding Projects?
User avatar
Erik_Twice
Next-Gen
 
Posts: 6224
Joined: Fri Mar 27, 2009 10:22 am
Location: Madrid, Spain

Reducing the number of power bricks?

by Erik_Twice Tue Sep 25, 2018 6:11 pm

One of the most painful parts of making a new setup are the power bricks. They are ugly, unsightly and take a lot of space. Having one or two around is fine, but having one per console is too much.

I was wondering if it was possible to reduce their number somehow, perhaps by powering several consoles with just one. What are your thoughts?
Looking for a cool game? Find it in my blog!
Latest post: BS F-Zero Grand Prix 2 ★★★
http://eriktwice.com/
User avatar
MrPopo
Moderator
 
Posts: 22191
Joined: Tue Aug 26, 2008 1:01 pm
Location: Orange County, CA

Re: Reducing the number of power bricks?

by MrPopo Tue Sep 25, 2018 7:17 pm

Most consoles take slightly different combinations of voltage and amperage, and feeding in a bad signal will degrade the components. I've managed to fuck up my CDX because I was using a Model 2 Genesis brick on it instead of a CDX brick. They have the same plug, but the Model 2 provides less amperage, which has damaged the console.
Image
Games Beaten: 2015 2016 2017
Blizzard Entertainment Software Developer - All comments and views are my own and not representative of the company.
User avatar
pierrot
Next-Gen
 
Posts: 3293
Joined: Thu Feb 09, 2012 2:54 am
Location: Banned

Re: Reducing the number of power bricks?

by pierrot Tue Sep 25, 2018 9:30 pm

Theoretically, if you had a bunch of consoles, with bricks that collectively averaged a DC operating voltage within something like +/- 10% of their individual voltages, then you could add their current requirements together and potentially run them off of one power supply. In general, the DC voltage being off from the power supply spec will probably only affect biassing on the operational/BJT amp circuits (for analog audio and video output), but if they happened to be operating rail to rail, too, then anything under the specified voltage could clip and cut off certain signals. I believe most of those outputs are within 1 volt peak-to-peak, though, so that's not an issue.

The real concern, unless you had some smart device controlling the power, is that you probably would be looking at a fire hazard. Also, for something like the NES, not all of the AC to DC power conversion system is internal to the power supply brick, and there are probably other examples of non-uniformity. I would probably never want to do something like this, personally. I have a Trio M1 for the Genesis + Sega CD, and I've only used it once or twice because it runs ungodly hot. I feel like if I actually tested it for efficiency, I would just end up throwing it in the garbage.

My personal setup would probably not be something other people like very much, but I'm sort of a nutjob who unplugs everything when it's not in use, and plugs it in again when it is being used. It tends to work for me.
Image
User avatar
samsonlonghair
Next-Gen
 
Posts: 4846
Joined: Tue Feb 17, 2009 2:11 pm
Location: Now: Richmond, VA. Formerly: Near the WV/VA border

Re: Reducing the number of power bricks?

by samsonlonghair Sun Nov 11, 2018 12:59 pm

There is such a thing as a switching power supply with interchangeable tips. You couldn't plug it into everything all at once, but you could plug it into just the console you're using at the moment. After all, you're not going to be playing your Sega Genesis and your super Nintendo simultaneously, are you?
User avatar
Ziggy587
Next-Gen
 
Posts: 11694
Joined: Mon Jun 09, 2008 5:12 pm
Location: Long Island, NY

Re: Reducing the number of power bricks?

by Ziggy587 Mon Nov 12, 2018 2:47 pm

Get something like this and mount it to the back of your furniture.

https://www.amazon.com/Tripp-Lite-Outle ... ower+strip

https://www.amazon.com/Tripp-Lite-Outle ... ower+strip

Then just use a bit of cable management to route each wire to the console so you don't end up like this...

Image
Image
Return to Technical Help

Who is online

Users browsing this forum: No registered users and 9 guests