Search found 24 matches
- Sun Jun 26, 2011 5:26 am
- Forum: Technical Help
- Topic: Pal RF mod reversal.
- Replies: 9
- Views: 1285
Re: Pal RF mod reversal.
Desperation Bump
- Mon Jun 06, 2011 5:53 pm
- Forum: Technical Help
- Topic: Playstation 1 freezes?
- Replies: 20
- Views: 1655
Re: N64 Help!
Does the console rattle?
- Fri Jun 03, 2011 1:08 pm
- Forum: Technical Help
- Topic: Pal RF mod reversal.
- Replies: 9
- Views: 1285
Re: Pal RF mod reversal.
Looks like i'm gonna have to replace the missing resistors and capacitors to get this to work again. Could someone upload a very high rez scan/picture of the underside of a white pc engine board? alternatively: r137 r138 r141 and c137 are the components that are missing. if anyone can supply info on...
- Wed Jun 01, 2011 6:57 pm
- Forum: Technical Help
- Topic: Pal RF mod reversal.
- Replies: 9
- Views: 1285
Re: Pc-Engine rgb mod.
Thanks for the leads!
- Wed Jun 01, 2011 10:46 am
- Forum: Technical Help
- Topic: Pal RF mod reversal.
- Replies: 9
- Views: 1285
Re: Pc-Engine rgb mod.
Ok, I got a cd-rom adaptor so i could avoid messing around to much with this. I thought i'd just use the rca jacks on that and basically use the cd adaptor like a huge av booster. This doesn't work. I looks like the rf mod basically under-clocks the console so it outputs video at 50hz rather than 60...
- Fri Apr 29, 2011 5:50 pm
- Forum: Technical Help
- Topic: Power Supply For IFU-30A
- Replies: 3
- Views: 901
Re: Power Supply For IFU-30A
Thanks Ziggy, I know that the PSU needs to be 9v at 1.5a, it the actual tip that i need dimensions for. Un-fortunately as i'm located in something of a technological hinterland getting the tip from a shop would probl'y cost the same as the psu does off e-bay. I was hoping if someone knew what tip di...
- Fri Apr 29, 2011 7:15 am
- Forum: Technical Help
- Topic: Power Supply For IFU-30A
- Replies: 3
- Views: 901
Power Supply For IFU-30A
Hello, got myself an IFU-30A for my pc engine without a psu of ebay. Does anyone know the dimensions for the power adaptor tip, or where to get a suitable PSU in the UK?
Thanks
Zutroy
Thanks
Zutroy
- Wed Apr 13, 2011 6:43 pm
- Forum: Technical Help
- Topic: GBC Turns Self Off (Pictures Included)
- Replies: 5
- Views: 676
Re: GBC Turns Self Off (Pictures Included)
If you have a voltmeter you could try and locate where power is lost on the board. From the pics it looks like a battery has leaked on it and might've corroded some joints. I'd try to re-solder that batter terminal also.
- Wed Apr 13, 2011 6:38 pm
- Forum: Technical Help
- Topic: Game Port on PC Controller that looks like S-Video Port?
- Replies: 3
- Views: 436
Re: Game Port on PC Controller that looks like S-Video Port?
Just a thought, but x-box style pads have a breakaway link in the cable to stop you damaging the port or console, this looks a lot like a ps2 connector.
- Wed Apr 13, 2011 6:36 pm
- Forum: Technical Help
- Topic: PS2 No power (X_x), need help
- Replies: 8
- Views: 1050
Re: PS2 No power (X_x), need help
From the pictures i agree with SnowKitty, looks like you have the cable twisted. Hard to tell though. Hopefully this hasn't zapped the board, look for any burned resistors.